Maintenance Plans

Preventative maintenance on A/C and Heating systems

Prices start at $65/unit; prices are adjusted if there are more than 10

Determination will be addressed accordingly with owner

Items listed are not the full deatiled lists of tasks:

A/C Systems

This side of servicing to the unit consists of:

1. Washing of indoor and outdoor coils

2. Check wiring for looseness or corrosion (burnt spots) as well as thermostat's functioning

3. Checking the olhms on contactors and relays in system; as well as for pivoted spots

4. Checking on the capacitance of all capacitors that are in the system

5. Checking of the amp draw on all motors and the compressor in system

6. Checking Freon level in system (by checking superheat and subcooling) as well as temp. drop

7. Checking of the ductwork throughout the system, as well as line sets

8. Checking drain lines and adding of drain tabs to prevent future drain blockage

9. Checking to make sure that filter has been changed accordingly and airflow is adequate enough

H.P. Systems

This side is done the same as regular A/C system except there is a reversing valve that is now involved with the system that will be checked, as well as the control (defrost board on the system). 

Heating on H.P. Systems

1. All things are checked for the winter months, just as summer months

2. System is not washed at this time unless coils are preventing airflow for change of Freon state

3. Checking of the defrost board, defrost t-stat, and checking complete defrost operation. 

4. Olming out the heat strips

5. Checking of Freon levels, as well as temperature rise

Gas System

1. Cleaning of burners in the system, as well as gas valves for debrid 

2. Checking the capacitance of capacitor for inducer motor 

3. Checking of flame igniter and sensor, as well as gas pressure and burning of flames

4. Checking of heat exchanger for cracks

5. A lot of things are still checked in the same manner as it is done in the A/C and heat mode in the system